Expand the length-adjustment bracket until Mounting pegs with the holes and then compress the spring-loadedĬ. If your rack has #10-32 rack-post holes, align the Square holes, or smaller #10-32 round holes when the mounting peg Protrude through the rack-post holes are designed to fit round or They enter the desired front rack-post holes from the front. Position a slide-rail assembly inside theĪnd “REAR” markings on the slide-rail assembly to orient theĪssembly correctly with the front and rear rack posts.ī. Release the clip marked “PULL” to lock theĪ. On the rear side of the securing-latchĪssembly, hold open the clip marked “PULL.”ī. Insert the mounting pegs into the rack-post holes.Ī. Has a spring-loaded securing latch that must be open before you can The end of the slide-rail assembly marked “FRONT” Slide rails and the server into a rack, follow these steps:įigure 1). If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. The following guidelines are provided to ensure your safety: This unit should be mounted at the bottom of the rack if it is the only unit in the rack. Warning: To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. ![]() Installing the Cisco SNS-3415/3495 Appliance Rackĭescribes how to install the Cisco SNS-3415 or Cisco SNS-3495
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |